Vials, Septa

Screw neck vials ND13 with 13-425 thread made of clear and amber first hydrolytic class glass facilitate easy filling with viscous substances thanks to their wide opening.

The LABSOLUTE® vials for optimised micro-sampling are the best solution for very small sample volumes.

The blue Push-On caps made of PE have a thinned penetration point, but no additional septum. They are an inexpensive alternative to crimp caps for non-critical applications.

The transparent PE caps are 9 x 5.9 mm and have a 4 mm centre hole.

Septa made of natural rubber are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Micro-inserts made of clear first hydrolytic class glass are suitable for screw neck vials ND8 with small opening.

Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:

Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request.

Clear lacquered caps, so called headspace caps, with a special score line that breaks when the internal pressure reaches 3.0 ± 0.5 bar. The excess pressure is then released, and the risk of the vial exploding can be avoided.

Clear lacquered centre tear-off caps and complete tear-off caps. These caps are available in several colours on request.

Gold lacquered, magnetic crimp caps with 5 mm centre hole to be used with CE HS500/HS800, CTC 500, as well as Fisons HS500 / HS800 instruments.

Gold lacquered, magnetic crimp caps with 8 mm centre hole to be used with CTC Combi PAL instruments.

Red lacquered, magnetic bimetal crimp caps with 8 mm centre hole to be used with CTC Combi PAL instruments.

These septa, made of silicone blue transparent / PTFE white, are temperature-resistant from -60 °C to 200 °C. They are 3.0 mm thick and have a hardness of 45° shore A. They have better purity than septa made of natural rubber or red rubber. However they have less effective resealability properties and are therefore more suitable for single-injection applications.

Due to their high cleanliness, they are especially used for critical and sensitive analysis.

Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.

These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties with regard to cleanliness.

The LABSOLUTE® kits ND9 contain shrink-wrapped short thread vials ND9 made of clear or amber first hydrolytic class glass and corresponding short thread screw caps made of PP.

Kits containing Ultrabond seals are especially for the use with Waters autosamplers.

Screw neck vials ND24 made of clear and amber first hydrolytic class glass are suitable for EPA (Environmental Protection Association) analysis and can, upon request, be supplied with a sterility certificate that is specifically required for TOC analyses.

These vials are especially used with autosamplers made by Agilent, Dionex, Shimadzu, Tekmar, Thermo Scientific and Varian.

Screw seals ND15 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 15-425 thread, a 9 mm centre hole or are closed.

Screw seals ND18 are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 18-400 thread, a 12 mm centre hole or are closed.

ND15 seals are suitable for items 7.616 898, 7.618 935, 7.616 655 and 7.618 936.
ND18 seals are suitable for items 7.616 899 and 7.616 139.

These ND18 screw caps with 18-400 thread are not compatible with ND18 precision thread vials !

These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties.

Snap ring seals ND11 are made of PE and are supplied with fitted septa made of a variety of materials. They are available in a soft and hard version as well as in different colours. Snap ring seals are very easy to use, time-saving and inexpensive.

These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Screw seals ND13 are made of PP and have a 13-425 thread. They have a 8.5 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.

These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties.