Hårdhedsmåling

Shore hardness testers for hardness determination of plastics through penetration measurement

• Typical application: Measurement of penetration depth (Shore).
• Material thickness of the sample, min. 4 mm
• Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are not possible because of very narrow standard tolerances
• Can be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)

Shore A for rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials
Shore A0 for foams, sponges
Shore D for plastics, synthetic resin, Resopal^®, epoxides, Plexiglas^® etc.
Compact handheld durometer for plastics with digital display.

• Large display with backlight
• Selectable: AUTO-OFF function or continuous operation, charge indicator
• Delivered in a hard carrying case

Specifications
Precision:	1 % of max. measuring value
Dimensions (W x D x H):	162 x 65 x 38 mm
Net weight:	173 g

Accessories Hardness comparison plates for Shore hardness testers, HB / HD Alternative Shore hardness testers, analogue, HB

Advanced features for demanding applications.

• Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness values.
• External impact sensor (Type D) included
• Automatic recognition of the impact (rebound) sensor connected to the HMM
• Mobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibility
• All measurement directions possible (360°) thanks to an automatic compensation function
• Standard block for calibration included (approx. 790 ± 40 HL)
• Internal memory for up to 9 data groups, with up to 9 values per group forming the average value of the group
• Mini statistics function: displays the measured result, the average value, the impact direction, date and time
• Measurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)
• Automatic unit conversion: The measuring result is automatically converted into all specified hardness units
• Delivered in a hard carrying case
• Wireless IR printer included for on-site printing of measurement protocols (battery operated)

Specifications
Measuring range:	170 to 960 HL
Readability:	1 HL
Precision:	1 % at 800 HLD (± 6 HLD)
Measuring range tensile strength (steel):	375 to 2639 MPa
Min. sample weight on a solid and stable support:	3 kg
Minimum sample thickness:	8 mm
Minimum sample radius (concave/convex):	50 mm (with support ring: 10 mm)
Dimensions (W x D x H):	80 x 30 x 150 mm
Net weight:	approx. 200 g
Power supply:	Power adapter, external or 3 x 1.5 V AAA batteries

Alternative

Manual test stand for highly accurate tensile and compressive force measurement, with length measurement.

• For vertical and horizontal use
• Precise measurement results
• High level of security with repeated measurements
• Large base plate with various holes for fixture mountings
• Can be used for force gauges up to 500 N (not included)
• Digital length meter: Zero setting possible, pre-length can be set manually

Specifications
Digital length meter
Measuring range:	max. 200 mm
Readout:	0.01 mm
Max travel from base plate:	297 mm
Travel distance per knob rotation (one turn):	3.1 mm
Dimensions (W x D x H):	151 x 234 x 465 mm
Net weight:	approx. 8.3 kg

Accessories  Alternative Test stand TVL-XS, manual Alternative

Shore hardness testers for hardness determination of plastics through penetration measurement

• Typical application: Measurement of penetration depth (Shore).
• Material thickness of the sample, min. 4 mm
• Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are not possible because of very narrow standard tolerances
• Can be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)

Shore A for rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials
Shore A0 for foams, sponges
Shore D for plastics, synthetic resin, Resopal^®, epoxides, Plexiglas^® etc.
Compact handheld durometer for plastics with drag indicator.

• Max mode: Holds the maximum value in the display
• Point mode: Shows one instant value
• Screws to screw on to the TI: M7 fine thread
• Delivered in a plastic carrying case

Specifications
Precision:	3 % of max. measured value
Dimensions (W x D x H):	60 x 25 x 115 mm
Net weight:	approx. 160 g

Accessories Hardness comparison plates for Shore hardness testers, HB / HD Alternative Shore Hardness Testers, Digital, HD

The test kits have been specially developed for the analysis of boiler, cooling and service water.

Alternative Reagents VARIO for Photometer Lovibond®and HACH® Alternative Reagent Tablets for Photometers and Comparators Lovibond® Alternative Test Kits for Boiler-, Cooling- and Industrial Process Water

The Leeb hardness tester measures metallic samples and offers mobility and flexibility compared to stationary tabletop devices and testing devices with internal sensor.

• External impact sensor
• All measurement directions possible (360°) thanks to an automatic compensation function
• Internal memory for up to 600 data groups
• Mini statistics function: displays the measured result, the average value, the impact direction, date and time
• Measurement value display: Rockwell (Type A, B, C), Vickers (HV), Shore (HS), Leeb (HL), Brinell (HB)
• Automatic unit conversion: The measuring result is automatically converted into all specified hardness units
• Measuring with tolerance range (limit-setting function):Upper and lower limiting can be programmed
• Acoustic and visual signal
• Matrix display: Backlit multi-function display
• Robust metal housing

Scope of supply:
HK-D: Mobile Leeb hardness tester, hard carrying case
HK-DB: Mobile Leeb hardness tester, hard carrying case, standard block for calibration, hardness approx. 800 HLD

Specifications
Measuring range:	170 ... 960 HL
Readability:	1 HL