-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and Microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Heating mantles
Standard heating mantles series KM-G
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s7311_1.jpg)
LabHEAT ®-Heating mantles for flasks, round bottom. Flexible glass yarn heating element, outer jacket in glass silk, with diam. 60mm bottom out-let from 500ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection), nominal voltage 230 V AC....
Power controller KM-L116 for heating mantles
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642660_3.jpg)
LabHEAT ®-regulator for heating mantles. Electromechanical; infinitely variable control over power outlet; plastic housing (H x W x D) 55 x 65 x 120 mm; switching power max. 2990 W (13 A); 1.5 m power supply (earthed) cable with plug....
Electronic heating mantles, EM series
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4365_2.jpg)
Polypropylene outer case is resilient and chemically resistant. Highly efficient in heating up to a maximum element temperature of 450 °C. The flexible heating element is suspended in a thermal insulating cartridge to provide maximum heat transfer with minimum risk of flask breakage. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request....
Metal-cased heating mantles series KM-ME, with controller
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642520_4.jpg)
LabHEAT ® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch, in addition equipped with a controller which allows a continuous adjustment of the heater power; max. heating element temperature 450°C; 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC....
Laboratory regulator series KM-RX1000
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642654_1.jpg)
LabHEAT ®-regulator. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values. PID self-optimisation, with ramp function, USB port, for external configuration. Pt-100 or thermocouples for temperatures up to 1200 °C, metal housing (H x W x D) 75 x 205 x 140 mm with fixed support clamp, switching power max. 2300 W (10A), 1.5m power supply (earthed) cable with plug. Nominal voltage 230 V AC....
Electronic multi-size heating mantles, spill-proof, EMX series
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4366_2.jpg)
Solid stainless steel liner, which protects against fluid spills and is easy to clean, with central aperture to accommodate round-bottom and pear-shaped flask and 60° funnels. Polypropylene outer case is resilient and chemically- resistant. Highly efficient in heating up to an element temperature of 450 °C. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request....
Electronic multi-size heating mantles, V-shaped, EMV series
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4367_1.jpg)
Solid, with mesh stainless steel liner, which protects against fluid spills, with central aperture to accommodate round-bottom and pear-shaped flask and 60° funnels. Polypropylene outer case is resilient and chemically- resistant. Highly efficient in heating up to a maximum element temperature of 450°C. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request....
Electronic stirrer mantles SHM-200 series
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4368_1.jpg)
Built-in adjustable heater control up to an element temperature of 450°C and magnetic stirring control up to approx. 520rpm with auto-reverse facility and automatic stirrer bar trap; the stirrer unit has an independent power supply. Polypropylene outer case is resilient and chemically-resistant. Even at full power output, the exterior remains ""cool-to-touch"" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request....
Glass fibre-insulated heating cables series KM-HC-G
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642750_2.jpg)
LabHEAT ®-Heating cables. No protection against ingress of water; glass fibre insulation without protective braiding; outer diameters dia. 3.5 to 4.5mm; min. bending radius > 5mm; max. heating element temperature 450°C; preterminated with 2 x 1.5m cold end; nominal voltage 230V AC....