-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and Microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Magnetic stirring bars
Set of magnetic stirring bars, cylindrical, 10 pieces, PTFE
The set of LABSOLUTE® magnetic stirring bars is a perfect assortment of the most common sizes for almost all applications. The cylindrical, smooth, PTFE-coated stirring bars come in a solid box with a transparent, hinged lid.
The set consists of the following 10 stirring bars: 1x 15 x 6 mm, 2x 20 x 7 mm, 2x 25 x 7 mm, 1x 30 x 7 mm, 2x 40 x 7 mm, 1x 50 x 7 mm and 1x 60 x 7 mm....
Stirring bar retrievers, PTFE
The LABSOLUTE® stirring bar retrievers in the lengths of 150, 250 and 350 mm are suitable for removing magnetic stirring bars from vessels of all kinds. They have a strong permanent magnet (Alnico 5) with a 10 mm diameter. Due to the PTFE coating the stirring bar retrievers are particularly resistant to chemicals and temperatures....
LLG-Magnetic Stirring Bar Retrievers, PTFE
PTFE-encapsulated stirring bar retriever with strong permanent magnet (Alnico 5), universal chemical resistance. For the removal of stirring bars from aggressive liquids, prevents loss of stirring bars. Lower end diameter 10 mm....
LLG-Universal reaction block system for magnetic stirrers
Universal alternative to oil bath
The reaction block allows syntheses to be carried out in round flasks at temperatures of up to 250 °C. As a result, with this system, oil as a heat transfer media is made redundant and your lab is a safer place. The reaction block ensures safety at work and prevents oil baths and heating mantles from overheating in your lab. The messy oil clean-ups that results from changing oil or removing flasks from an oil bath will be eliminated. Injuries and burns from hot oil will never happen again. Uniform mixing is also guaranteed because there is no interference to the magnetic field from the aluminium blocks. This system ensures optimal heat transfer from the heating plate directly into the medium....
Magnetic stirring bar, octagonal, PTFE
- Interrupted profile provides greater surface area and added turbulence when compared to the smooth surface of cylindrical bars
- Pivot ring aids in reducing friction and chattering
- PTFE encapsulated Alnico magnet
- Autoclavable
Magnetic stirring bars ASTEROID, triangular, PTFE
More than 4x higher torque transmissible. Unbeatably enhanced mixing effect in comparison to conventional stirring bars. Strong, stable, long-lasting magnetic field, with no demagnetization effect. Concave design for minimal surface contact and reliable rotation, triangular shape for powerful shear force and enhanced mixing at lower rotational speeds. Significantly higher rotation speeds achievable, high quality, even and sealed PTFE encapsulation. Conform to FDA requirements, steam sterilisable at 121 °C. Multiple enhancements against all types of magnetic stirrers....
Magnetic stirring bar behrotest, set 1 + 2
Magnetic stirring bars behrotest
®, Set 1 in a transparent box with hinged lid
Consisting of: 2x 20 x 6 mm, 2x 25 x 6mm, 2x 30 x 6 mm, 2x 40 x 8 mm, 1x 50 x 8 mm, 1x 60 x 9 mm
Magnetic stirring bars behrotest
®, Set 2 in a transparent box with hinged lid including magnetic stirring bar retriever, length 245 mm...
Magnetic Stirring Bar Retrievers, PTFE
PTFE-encapsulated stirring bar retriever with strong permanent magnet (Alnico 5), universal chemical resistance. For the removal of stirring bars from aggressive liquids, prevents loss of stirring bars. Lower end diameter 10 mm....
Magnetic stirring bar set RS 1 / RS 2
RS 1: Comprises of one each of a plain and a cylindrical Ikaflon
®stirring bar, 10mm to 80mm long and 25mm and 40mm long Trika
® triangular bars.
RS 2: Comprises of one each of IKAFLON
® 40 round, IKAFLON
® 40 glass, IKAFLON
®...
Beaker insert stirrers, Magneto-stabil
For all beakers from 100 to 2000ml capacity. Comprises conical lid made of chemical-resistant plastic with stirrer bearing, two pipette openings and captive PTFE magnetic stirring bar with support shaft. Guarantees gentle running, with no de-coupling of the stirrer bar....
Magnetic stirring bars Komet
Ultra strong SmCo magnetic core, giving up to 3 x higher torque than conventional magnetic bars, ideal for highly viscous materials and difficult stirring conditions, PTFE-coated and autoclavable with no demagnetization.
New feature: Komet discs and rings for vertical operation, ideal for test tubes....
Magnetic stirring bars SATELLITE 70 / 140
Stirring Bar SATELLITE 70
Extremely strong, abrasion-free and wear-free magnetic stirring bar, bearing on a tripod-construction, especially for the use in stainless steel vessels and in the case of media containing abrasive particles, e.g. sand or sediments, no direct contact between stirring bar and reaction vessel, therefore steady firm, wear-free, chemical resistance comparable to PTFE, recommended magnetic stirrers: 2mag MIX 1 XL and MIXdrive 1 XL....
Magnetic Stirring Beakerliner, PTFE
PTFE-encapsulated magnetic core (Alnico 5) axially mounted in a guide cage made of PTFE, universal chemical resistance. No shear action on the bottom of the beaker, smooth running in glass beakers also on an uneven bottom. The cage acts like a baffel and thus provides optimum mixing results....
Stirrer Bearings, PTFE
The sealing rings on these bearings ensure a perfect sealing. The ground joint no longer sticks, the danger of breaking is reduced and the cone can be removed easily from the socket. A special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stainless steel, glass and BOLA Stirrer Shafts....
Magnetic stirring bars, cylindrical, PTFE
PTFE-encapsulated magnetic core (Alnico 5), standard magnetic stirring bars, universal chemical resistance. Temperature resistance: from -200 to +250 °C. Cylindrical magnetic stirring bars offer excellent centering and smooth running characteristics....
Additional Stirrer Blades for Bola Stirrer Shafts, PTFE
Useful extension to the existing range of Bola stirrer shafts. The additional blades can optionally be fixed in your preferred position on every stirrer shaft with diameter 8,10 or 16 mm (a flat spanner is included). The stirrer blades are entirely made of PTFE, the mounting devices are made of a special PTFE-compound. A high chemical and thermical (-200 to +250 °C) resistance is assured. This "building block system" allows the user to define a stirrer of their own special requirements....
Stirring bars Spinbar®, octagon
Multi-faceted shape provides greater surface area and added turbulence for more vigorous, thorough mixing when compared to the smooth surface of cylindrical bars.
- With pivot ring for better mixing conditions
- Alnico magnet encapsulated with Teflon® brand PTFE coating
- FDA Grade, USP Class VI
- Good chemical compatibility
- Autoclavable
- Manufactured in a registered ISO 9001:2015 facility
Magnetic Stirring Bar Spinbar® Polygon
Multi-faceted polygon shape with increased surface area creates added turbulence relative to similar sized, smooth cylindrical bars to provide thorough mixing.
- Alnico magnet encapsulated with Teflon® brand PTFE coating
- FDA Grade, USP Class VI
- Good chemical compatibility
- Autoclavable
- Manufactured in a registered ISO 9001:2015 facility
Flask Inlay Series H 135 for IKA Magnetic Stirrers
For holding round flasks when used with magnetic stirrers. Made of anodised aluminium. Can be used up to max. 180 °C.
Fits on magnetic stirrers: RCT basic, RET basic, RH basic, RH basic white, RH digital, RH digital white, RET control-visc, RET control-visc white, IKA plate (RCT digital), C-MAG HS 7 control (only with adapter)....
Magnetic stirring bars, borosilicate glass
Magnetic core (Alnico 5) encapsulated in borosilicate glass, cylindrical shape, extremely smooth surface prevents from penetration of substances, non-porous, non-contaminating, universal chemical resistance. FDA conformity. Temperature resistance -200 bis +250 °C....
Impellers for Overhead Stirrers
Powerful Stirring
Shaft diameter: 8mm
Blade and Half-Moon Impeller
- These impellers are recommended for applications which require an average speed
- For mixing products with average viscosity
- Models BR 12, BR 14 and HR 18 come with collapsible blade for narrow neck vessels
Magnetic Stirring Bars, Cylindrical, PTFE
With pivot ring. PTFE-encapsulated magnetic core (Alnico 5). Universal chemical resistance. This shape provides a bigger surface area and a very steady spinning position with additional turbulences. Temperature resistant from -200 to +250 °C....