Erime noktası tayini

Alternative Melting point tubes Alternative Melting Point Capillary Tubes KIMAX® Alternative Melting point tubes Marienfeld Alternative Melting point tubes Büchi

Capillary tubes for melting point analysis. Clear glass, different diameters and lengths. Special remarks are available. Other sizes on request.

Alternative Melting point tubes Electrothermal Alternative Melting point tubes Büchi Alternative Melting point tubes Marienfeld Alternative Melting Point Capillary Tubes KIMAX®

Accurately and reliably determining the melting point of up to three samples simultaneously.
The MP-800D has a custom designed user interface based on an established Android platform for intuitive setup and navigation. All operation is via the 7" colour touchscreen. Once programmed, users can leave the MP-800D to complete the melt analysis independently, alternatively the melt can also be observed on the screen live or post melt. During post melt review additional measurement tags can be added if required, such as meniscus point or the automatically obtained result can be overwritten.
A generous 8 GB on board storage is included, which should comfortably hold approximately 300 melts files including videos. Results can also be transferred via USB stick on to PC or can be printed directly from the unit via the accessory printer.
The MP-800D features a useful storage drawer to house all standard capillary tubes.

All units are factory supplied with a calibration certificate showing individual serial number for traceability. The SMP50 also conforms to Pharmacopeia and GLP.

Specifications
No of samples:	3 simultaneously
Temperature range:	Ambient to 400 °C
Temperature resolution:	0.1 °C
Display:	7'' HD Colour
Ramp rates:	0.1 to 20 °C in 0.1 °C increments
Temperature sensor:	PT1000 Platinum resistance
Memory:	8 GB (approx. 300 results with video)
Cool down time:	350 to 50 °C (approx. 12 min)
Heat up time:	50 to 350 °C (approx. 6 min)
Data transfer:	USB Flash drive
Sample level:	2 to 3 mm in 50 mm or 100 mm length capillaries
Weight:	4.6 kg
Power supply:	120-230 V, 50/60 Hz

Accessories Melting point tubes for MP series Accessories Printer for Melting point apparatus MP-800 / Spectralphotometers 7200, 7410, 7415, 7615 Alternative Melting point apparatus MP-200D / MP-200D-HR Alternative Melting Point Apparatus MP-400D Alternative Automatic Melting Point Apparatus MP-800D with IQ/OQ documentation

The melting point apparatus can be used to determine the melting point of up to 3 samples simultaneously. The extension arm is height-adjustable and can be folded away completely. The integrated LED illumination and the rotatable viewing head facilitate viewing of the melting process.

• Membrane keypad with simple menus for intuitive operation
• Digital microprocessor enables fast heat-up and precise temperature control
• Viewing head with 8x wide-angle magnifier and adjustable focus
• Audible signal when the set oven temperature is reached

-2 fixed ramp rates

• Storage of up to four melt temperatures in the temporary memory

Scope of supply: Melting point apparatus, lens hood, power supply with EU, UK, and US plug, 100 melting point tubes

Number of samples:	3 simultaneously
Temperature range:	Ambient + 5 °C ... 400 °C
Resolution:	0.1 °C
Accuracy:	±0.5 °C at 20 °C linearly to ±1.0 °C at 350 °C
Digital thermometer sensor:	Platinum resistance thermometer (PT100)
Chamber illumination:	3 x white Super Flux LED's
Illuminous intensity (per LED):	3500 Lux
Ramp rates:	1.0 °C/min or 10.0 °C/min
Capillary diameter:	2 mm
Dimensions (W x D x H):	200 x 355 x 80 mm
Weight:	2.5 kg
Power supply:	100 ... 240 V, 50/60 Hz

Accessories Melting point tubes Electrothermal Accessories Accessories for melting point apparatus MP-250D Alternative Electrothermal Melting point apparatus MP-250D-P Alternative Electrothermal Melting point apparatus MP-250D-PR

The melting point apparatus can be used to determine the melting point of up to 3 samples simultaneously. The extension arm is height-adjustable and can be folded away completely. The integrated LED illumination and the rotatable viewing head facilitate viewing of the melting process.

• Membrane keypad with simple menus for intuitive operation
• Digital microprocessor enables fast heat-up and precise temperature control
• Viewing head with 8x wide-angle magnifier and adjustable focus
• Audible signal when the set oven temperature is reached

-Ramp rate individually adjustable

• Batch memory for up to 1000 melting point determinations with date, time, and batch number
• RS232 interface for connecting a printer (please order separately)
• USB interface allows transfer of measurement results to PC
• Storage of up to four temperatures in the temporary memory

Scope of supply: Melting point apparatus, lens hood, power supply with EU, UK, and US plug, 100 melting point tubes

Number of samples:	3 simultaneously
Temperature range:	Ambient + 5 °C ... 400 °C
Resolution:	0.1 °C
Accuracy:	±1 %
Digital thermometer sensor:	Platinum resistance thermometer (PT100)
Chamber illumination:	3 x white Super Flux LED's
Illuminous intensity (per LED):	3500 Lux
Ramp rates:	0.2 ... 10.0 °C/min
Capillary diameter:	2 mm
Dimensions (W x D x H):	200 x 355 x 80 mm
Weight:	2.5 kg
Power supply:	100 ... 240 V, 50/60 Hz

Accessories Melting point tubes Electrothermal Accessories Accessories for melting point apparatus MP-250D Alternative Electrothermal Melting point apparatus MP-250D-F Alternative Electrothermal Melting point apparatus MP-250D-PR

The melting point apparatus can be used to determine the melting point of up to 3 samples simultaneously. The extension arm is height-adjustable and can be folded away completely. The integrated LED illumination and the rotatable viewing head facilitate viewing of the melting process.

• Membrane keypad with simple menus for intuitive operation
• Digital microprocessor enables fast heat-up and precise temperature control
• Viewing head with 8x wide-angle magnifier and adjustable focus
• Audible signal when the set oven temperature is reached

-Ramp rate individually adjustable

• Batch memory for up to 500 melting point determinations with date, time, and batch number
• RS232 interface for connecting a printer (please order separately)
• USB interface allows transfer of measurement results to PC
• Temporary memory for start and end points of 3 temperatures

Scope of supply: Melting point apparatus, lens hood, power supply with EU, UK, and US plug, 100 melting point tubes

Number of samples:	3 simultaneously
Temperature range:	Ambient + 5 °C ... 400 °C
Resolution:	0.1 °C
Accuracy:	±1 %
Digital thermometer sensor:	Platinum resistance thermometer (PT100)
Chamber illumination:	3 x white Super Flux LED's
Illuminous intensity (per LED):	3500 Lux
Ramp rates:	0.2 ... 10.0 °C/min
Capillary diameter:	2 mm
Dimensions (W x D x H):	200 x 355 x 80 mm
Weight:	2.5 kg
Power supply:	100 ... 240 V, 50/60 Hz

Accessories Melting point tubes Electrothermal Accessories Accessories for melting point apparatus MP-250D Alternative Electrothermal Melting point apparatus MP-250D-F Alternative Electrothermal Melting point apparatus MP-250D-P

Very easy to use. Various characteristics can be observed simultaneously. Linear temperature scale adjustment. Enables quick identification of organic substances. Supplied with test and standard material sets. CE marked.

Dimensions (W x D x H):	430 x 100 x 140mm
Temperature range:	+50 to +260 °C

Supplied with 100 melting point tubes, open one end.
With BioCote, silver-based, antimicrobial protection.

Specification	MP-200D / MP-200D-HR
Number of samples:	2
Temperature range:	Ambient to 300ºC
Temperature accuracy:	± 1.0ºC at 20ºC, ± 2.5ºC at 300ºC
Display:	Three digit LED / Four digit LED
Display resolution:	1ºC / 0.1ºC
Display hold facility:	No/ Yes
Ramp rates:	20ºC per minute to plateau, 2ºC per minute to melt / 20ºC per minute to plateau, variable between 1 and 10ºC per minute to melt
Dimensions (w x d x h):	160 x 220 x 170mm
Net weight:	1.8kg
Electrical supply:	230V, 50Hz, 75W

Accessories Melting point tubes Alternative Melting Point Apparatus MP-400D

The MP-400D can take three samples simultaneously within the optimised heating block. To allow maximum flexibility a plateau facility is included with variable ramp rate between 0.5 and 10°C in 0.1°C increments. The tubes are illuminated with bright white LED's to give the clearest view of the samples during the melt. The block has been designed for easy access for cleaning. To allow the most comfortable viewing angle the MP-400D features a two stage head adjustment. The MP-400D features the patent pending head up display, this unique feature displays a floating image of the block temperature, visible through the eyepiece, in front of the tubes.

• Maximum temperature 400°C
• Patented head up display
• Integrated cooling 350°C to 50°C in 12 minutes
• Large easy to read user friendly interface

An accessory printer is available separately to produce a written record of the melt.

Specifications
No of samples:	3
Temperature range:	Ambient to 400°C
Temperature resolution:	0.1°C
Display:	40 x 4 segment LCD
Ramp rates:	0.5 to 10°C in 0.1°C increments
Memory:	7 results per tube
Date/time display:	Yes
Cool down time:	350 to 50°C (~12 mins)
Heat up time:	50 to 350°C (~ 6 mins)
Supply requirements:	120V / 230V 50Hz
Language variants:	English, German, French, Italian
Temperature unit:	°C

Accessories Melting point tubes for MP series Accessories Printer for Melting point apparatus MP-400D / Colony counter CC-200 Alternative Melting point apparatus MP-200D / MP-200D-HR

Made of DURAN^® tubing, with side limbs.

The M3000 provides fast and easy examination of powdery substances with a melting point up to 360 °C. Due to the triple capillary intake, it is possible to analyse three samples within one measurement run. Thanks to the preheating rate and the integrated fan cooling, fast measurements are possible in any temperature range.

• Semi-automatic measurement by means of 10x magnification optics
• 3 capillary intakes
• LCD display
• Monitoring of the illuminated sample via lens
• Fast cooling through integrated fan
• Digital display of all important data
• Display in German or English
• With RS-232 interface for printer CBM910
• Easy-to-clean membrane keypad

Scope of supply: Melting Point Meter, protective cover, 100 capillaries

Specifications
Temperature range:	30 ... 360 °C
Resolution:	0.1 °C
Accuracy:	±0.3 °C (30 ... 200 °C) ±0.5 °C (200 ... 360 °C)
Preheating rate:	up to 200 °C approx. 4.0 min up to 300 °C approx. 8.0 min
Heating rate:	1 °C min-1
Capillary-Ø:	1.4 mm
Capillary intake:	3
Dimensions (W x D x H):	210 x 230 x 360 mm
Weight:	4.3 kg
Power supply:	90 ... 264 V
IP code:	IP20

Alternative Melting Point Meter M5000

For powdery substances with a melting point up to 400 °C. A fan cooling allows fast measurements in every range of temperature. The display provides a clearly-arranged readout of all important measuring data.

• Fully automatic measurement by means of transmission optics
• 1 capillary intake
• LCD display
• Alarm signal when reaching the melting point
• Fast cooling through integrated fan
• Digital display of all important data
• Display in German or English
• With RS-232 interface for printer CBM910
• Easy-to-clean membrane keypad

Scope of supply: Melting Point Meter, protective cover, 100 capillaries

Specifications
Temperature range:	25 ... 400 °C
Resolution:	0.1 °C
Accuracy:	± 0.3 °C (25 ... 200 °C) ± 0.5 °C (200 ... 400 °C)
Preheating rate:	up to 200 °C approx. 4.0 min up to 300 °C approx. 9.0 min
Heating rate:	1 °C min-1
Capillary-Ø:	1.4 mm
Capillary intake:	1
Dimensions (W x D x H):	220 x 340 x 150 mm
Weight:	4.1 kg
Power supply:	90 ... 264 V
IP code:	IP20

Alternative Melting Point Meter M3000

High Purity range compatible with all Melting Point Instruments. Tested on a high specification melting point apparatus. Shelf life of 3 years (from date of manufacturing). Available as Single Melting Point Standard or as a Set of 3 different Standards. Glass bottles of 1 g. Sets include 3 bottles of 1 g.

Alternative Melting point tubes Alternative Melting point tubes Büchi Alternative Melting Point Capillary Tubes KIMAX® Alternative Melting point tubes Electrothermal

Capillary Tubes are made of borosilicate glass. A partial immersion thermometer, calibrated for 75 mm, is specified in most methods for the determination of melting points.

Alternative Melting point tubes Alternative Melting point tubes Electrothermal Alternative Melting point tubes Büchi Alternative Melting point tubes Marienfeld

Accurately and reliably determining the melting point of up to three samples simultaneously.
The MP-800D has a custom designed user interface based on an established Android platform for intuitive setup and navigation. All operation is via the 7" colour touchscreen. Once programmed, users can leave the MP-800D to complete the melt analysis independently, alternatively the melt can also be observed on the screen live or post melt. During post melt review additional measurement tags can be added if required, such as meniscus point or the automatically obtained result can be overwritten.
A generous 8 GB on board storage is included, which should comfortably hold approximately 300 melts files including videos. Results can also be transferred via USB stick on to PC or can be printed directly from the unit via the accessory printer.
The MP-800D features a useful storage drawer to house all standard capillary tubes.

All units are factory supplied with a calibration certificate showing individual serial number for traceability. The SMP50 also conforms to Pharmacopeia and GLP.

Specifications
No of samples:	3 simultaneously
Temperature range:	Ambient to 400 °C
Temperature resolution:	0.1 °C
Display:	7'' HD Colour
Ramp rates:	0.1 to 20 °C in 0.1 °C increments
Temperature sensor:	PT1000 Platinum resistance
Memory:	8 GB (approx. 300 results with video)
Cool down time:	350 to 50 °C (approx. 12 min)
Heat up time:	50 to 350 °C (approx. 6 min)
Data transfer:	USB Flash drive
Sample level:	2 to 3 mm in 50 mm or 100 mm length capillaries
Weight:	4.6 kg
Power supply:	120-230 V, 50/60 Hz

Accessories Melting point tubes for MP series Accessories Printer for Melting point apparatus MP-800 / Spectralphotometers 7200, 7410, 7415, 7615 Alternative Melting Point Apparatus MP-400D Alternative Melting point apparatus MP-200D / MP-200D-HR Alternative Automatic Melting Point Apparatus MP-800D

Capillary tubes for melting point analysis.